Home > Products > Industrial Systems > Industrial Computer > FS20000S model 200/100

FS20000S model 200/100

FS20000S model 200/100 title

Onsite Industrial Server Realizing High Performance and High Capacity

Points of Improved Performance and Function

Equipped with Intel® Xeon® Processor E5-2600 v4 for Servers

Can be equipped with up to two Xeon® processors E5-2658 v4 (2.3GHz/14 Cores) or E5-2609 v4 (1.7GHz/8 Cores) as CPU.

CPU Performance comparison

Weighted maximum performance (in APP value) Unit: Effective tera

Equipped with High-Speed, High-Performance Memory

Up to 256 GB of DDR4 SDRAM high-speed memory can be installed for each CPU, providing high system performance.

High-capacity storage

Can be equipped with up to eight 2.5" HDDs using a highly reliable SAS interface or 2.5” SSDs using a SATA interface with superior reading performance.

Remote Monitoring and Control Function

The system is equipped with a BMC (Baseboard Management Controller) device conforming to IPMI (Intelligent Platform Management Interface) Ver. 2.0 standards. This makes it possible, using a browser from another computer on the network, to check hardware information (CPU temperature, temperature in the chassis, fan rotation speed, and internal voltage), shut down the OS and perform power ON/OFF control.
In addition, the iKVM function allows you to operate the keyboard/mouse and display the local RGB output screen so that you can change the BIOS settings and check logs on the OS. Furthermore, the VM function*1 makes it possible to reset OS to the factory settings or update software.
Those operations can be performed from other computers on network.

Reliable Technology Supporting Stable Operation

Technology and Quality for Supporting 24-Hour Continuous Operation

High-quality, long-life parts are used, based on assumption of 24-hour continuous operation. The hardware is designed with derating taken into account. Thorough quality control is ensured by testing individual units at the component level, and then conducting, for all shipped products, function testing in the user shipment configuration and temperature tests to determine that product specifications will be fully satisfied (in the temperature range of 5 to 40 °C).

Uses Memory with ECC/Mirroring Functions

The system has memory with an ECC function for detecting and correcting single-bit errors. It also supports memory mirroring*2 to protect data from issues such as multi-bit errors that cannot be corrected with the ECC function, thereby supporting stable system operation.

Good Maintainability and Protective Structure

The system enables preventive maintenance replacement of parts with a limited service life (HDDs, SSDs, cooling fans, battery, and power supply units in a redundant configuration) while the system is operating.

Examples of Replacement

Operation Error Prevention

Dimensions

Specifications

FS20000S model 200 model 100
Processor Main Processor Intel® Xeon® Processor E5-2658 v4 2.3 GHz Intel® Xeon® Processor E5-2609 v4 1.7 GHz
Number of CPU sockets 1CPU 2CPU 1CPU 2CPU
Hyper-Threading setting Disabled Enabled Disabled Enabled -
No. of Cores/No. of Threads 14/14 14/28 28/28 28/56 8/8 16/16
Level 2 Cache Memory Capacity 256 KB/Core (built into main processor)
Level 3 Shared Cache Memory Capacity 35 MB (built into main processor) 20 MB (built into main processor)
No. of Processors Up to 2 processors mountable
Chipset Intel® C612 Chipset
Main Memory*1 Capacity With 1CPU: Min. 4GB (4GB × 1), Max. 256GB (64GB*20 × 4)
With 2CPUs: Min. 8GB (4GB × 2), Max. 512GB (64GB*20 × 8)
Memory Check Method ECC
Memory Mirror*2 Compatible
Memory Interleave*2 Compatible
Type DDR4 SDRAM
Operating Speed*3 DDR4-2133/PC4-17000 DDR4-1866/PC4-14900
Auxiliary Storage Built-in HDD/SSD*4 Options (Refer to Optional Hardware Specifications)
Built-in DVD-ROM*5
Built-in DVD
Super Multi-Drive*5
RAID Compatible RAID 1/5/6/10/50
Interface COM Interface RS-232C (9-pin D-SUB) x 2ch (rear)
USB Interface*6 USB3.0 (TYPE A) x 2 ports (rear), USB2.0 (TYPE A) x 4 ports (front/rear 2 ports each)
Sound Interface*7 LINE IN/LINE OUT/MIC IN (3.5φ mini jack) (rear)
LAN Interface 10BASE-T/100BASE-TX/1000BASE-T (Auto Negotiation) (RJ45) x 3ch (rear)/ Wake On LAN® (main unit port only compatible)
Out of 3 channels, the settings of one channel can be switched from either “normal use” or “shared with remote monitoring ch.”
Graphic Interface RGB×1ch BMC (Baseboard Management Controller) Chip with built-in graphics function
DI/DO Interface Digital input/output (half pitch 20-pin) DI 4 points, DO 4 points, remote ON/OFF 1 point, remote initialize 1 point
Expansion Interface PCI Express slot*8 Total of 4 slots
PCI Express (x16) 1 slot (half size) PCI Express 3.0
PCI Express (x8) 1 slot (half size) PCI Express 3.0
PCI Express (x8) 1 slot (low profile size) PCI Express 3.0
PCI Express (x4) 1 slot (low profile size) PCI Express 3.0 exclusive to RAID controller board
PCI slot*9 1 slot (full size) PCI 3.0
Input Device Keyboard Options (refer to Optional Hardware Specifications)
Mouse Options (refer to Optional Hardware Specifications)
RAS Function Fan stop detection, CPU temperature rise detection, Internal temperature detection, Internal voltage detection, Memory error detection, Digital input/output (DI/DO 4 points each; remote power ON/OFF 1 point, remote initialize 1 point), Watchdog timer monitoring (at system startup/during system operation), HDD SSD monitoring, Software power off (shutdown), Remote initialize, Remote power on/off, Error information save on RAS memory, Operating time monitor function, Temperature information trend function, Simulation function, LED display function to indicate initialization state during unit startup, RAS status lamp function to display hardware operating status (cooling fan, battery voltage, internal temperature, RAID disk, power supply unit)
Remote Monitoring Control(IPMI)Function Verification of hardware monitor information (CPU temperature, internal temperature, fan speed, internal voltage), OS shutdown, power ON/OFF control, iKVM*10 function for keyboard/mouse control, display unit RGB output screen, VM function*10 makes it possible to reset OS to the factory settings or update software.
Power Supply
(Wide Range Power Supply)*11
Single Power Supply Configuration Rated voltage 100 VAC/240 VAC, allowable voltage 85 to 264 VAC, allowable frequency 50 Hz/60 Hz±3 Hz (Single power supply configuration: power supply unit x 1, Redundant power supply configuration: power supply unit × 2)
Redundant Power Supply Configuration
Electric Power Consumption 1,185W/1,247VA
Energy consumption efficiency based on Energy Conservation Act*12 Category N/A*13
Value N/A*13 N/A*13
Dimensions and Weight 434 (W) x 87 (H) x 592 (D) mm (without projections)
Weight: about 20 kg
Items included in shipment package Power cable (corresponding to the number of power supply units mounted), power cable pull-out prevention guard (corresponding to the number of power supply units mounted), rack mounting brackets (2 in each set), product recovery media (with OS pre-installed models), instruction manual PDF (included on CD media) *14
* Items other than those listed above may be included depending on the configuration of the system ordered.
Software (OS) *15 Windows Server® 2008 R2 Standard SP1 (Japanese version/English version)*16 *17
Windows Server® 2012 R2 Standard Update (Japanese version/English version)*16
Red Hat® Enterprise Linux® 6.7 Server compliant (64 bit)

Optional Hardware Specifications

Expansion Main Memory DDR4 SDRAM 4 GB/16 GB/64 GB*19 selectable
Built-in HDD Capacity: 300 GB/900 GB Up to 8 units mountable (Hot swap compatible)
Built-in SSD Capacity: 400 GB Up to 8 units mountable (Hot swap compatible)
Built-in DVD-ROM*4 Read drive
DVD-ROM,CD-ROM,DVD-R,DVD+R,DVD-RW,DVD+RW,DVD-RAM,
CD-R,CD-RW
Built-in DVD super multi-drive*5 Write/Read drive
DVD-ROM,CD-ROM,DVD-R,DVD+R,DVD-RW,DVD+RW,DVD-RAM,
CD-R,CD-RW
Keyboard USB 109 keys (Japanese OS), 104 keys (English OS)
Mouse USB (optical)
RAS Terminal Board (UMP70) DI 4 points, DO 4 points, remote input 2 point
RAS Cable Half pitch 20-pin male at both ends. Cable length 1 m or 2 m
RAS Terminal Board Mounting Panel Simplified type
Slide Rail 2-step slide rail (2 steps in 1 set)
Slide Rail Support Bracket Bracket (1 set) to secure the slide rail to the rack
Instruction Manual (Bound Booklet) FS20000S model 200/100 unit instruction manual, RAS support software instruction manual, RAID controller (ER382C) instruction manual
Rubber foot 4 feet per set (for use on desktop)

Installation Environment Conditions

Installation Environment Temperature
(Operating/While Stored)
5 to 40°C /-10 to 50°C
Humidity (Operating/While Stored) 20 to 80% RH (no condensation) /10 to 90% RH (no condensation)
Vibration (Operating)*18 With HDD configuration: 2.0 m/s2
(JIS C60068-2-6:9 to 150Hz 1 cycle)
With SSD configuration: 4.9 m/s2
(JIS C60068-2-6:9 to 150Hz 1 cycle)
(While Packed) 19.6m/s2 or less
Shock (Operating/While Packed) 19.6m/s2 or less / 245m/s2 or less
Dust 0.3 mg/m3 or less (JEITA-IT-1004A Class B compliant)
Corrosive gas / chemicals Not to be detected (JEITA IT-1004A Class A compliant)
Allowable Instantaneous Power Failure Time 20 ms or less at the rated input voltage
Terminal Maximum Voltage Remarks
LINE IN 1Vrms Input impedance 10kΩ
LINE OUT 1Vrms Load impedance 10kΩ to 600kΩ
MIC IN 0.1Vrms Input impedance 10kΩ