Home > Products > Industrial Systems > Unified Controller nv series > Small-to-middle Scale PLC [type1 light]

Small-to-middle Scale PLC [type1 light]

Small-to-middle Scale PLC [type1 light] image

The Integrated Controller V series Model 2000 Sequence Control Module S2 (S2) has a proven track record in a wide range of fields as thecore component of social infrastructures and industrial systems. As well as handing down existing assets such as S2 applications, I/O and wiring, type1 light offers enhanced control performance and supports transition to next-generation control systems.

Standard Sequence Control Module type1 light S

Standard Sequence Control Module  type1 light S image

The type1 light S CPU mounts in a standard V2000 I/O rack (3 I/O, 5 I/O or 8 I/O racks are available). It can replace a S2E module. The type1 light S does not support racks with station bus, or I/O modules that require a station bus.

Compact CPU Module

The type1 light S CPU has both a RS485 port and an Ethernet port which supports Toshiba's ASCII computer link protocol. This allows connection by any HMI or SCADA software that has the Toshiba computer link driver.

Basic System Configuration

Basic System Configuration image

Local I/O unit

BU668
Basic base
PUM11
CPU module
IF661
G2 I/O interface
PS693
Power source unit
DI633
G2 I/O DI 16 points
DO633
G2 I/O DO 16 points
BU668
Expansion base

To Top

High-Performance Sequence Control Module type1 light H

High-Performance Sequence Control Module  type1 light H image

The Unified Controller nv series™ TC-net™ I/O is built-in to the type1 light H CPU. It can be applied to I/O systems to provide enhanced performance. The master station, built into the CPU module, enables direct connection of the TC-net™ I/O loop. A 4 km-long remote I/O system than can be installed at low cost. The connected I/O can be selected from Integrated Controller V2000 series I/O (G2 I/O) or Unified Controller nv series™ TC-net™ I/O.

Remote I/O System Configuration

TC-net™ I/O collects and controls remote field I/O in real time. The TC-net™ I/O is a high-speed, robust communications I/O system which uses a fiber optic cable which is highly resistance to electrical noise.

Basic System Configuration

Basic System Configuration image

Local I/O

BU648E
Basic base
PUM12
CPU module
IF661
Expansion interface
PS693
Power source module
EN651
Ethernet 100M
DI633
G2 I/O DI 16 points
DO633
G2 I/O DO 16 points
BU668
Expansion base

Remote I/O

BU648E
Basic base
PUM12
CPU module
IF661
Expansion interface
PS693
Power source module
EN651
Ethernet 100M
DI633
G2 I/O DI 16 points
DO633
G2 I/O DO 16 points
BU901
TC-net™ I/O adapter base
SA912
TC-net™ I/O adapter
BU905
TC-net™ I/O base
DI934
TC-net™ I/O DI 32 points
DO934
TC-net™ I/O DO 32 points
BU668
Expansion base
GA922
G2 I/O adapter

To Top

Redundant Sequence Control Module type1 light D

Redundant Sequence Control Module  type1 light D image

The type1 light D CPU supports redundancy.
Redundancy enables greater productivity by providing the highest system availability. With a program capacity of 128K steps and the ability to connect up to 192 I/O modules, the type1 light D is ideal for critical medium and large-scale systems.
The module can also be used in a single module configuration.

High Performance and Critical System Reliability

Automatic switching to the secondary CPU occurs if a problem is detected in the primary CPU.

Duplex System Configuration

Duplex System Configuration image

Local I/O

BU643D
Basic base
PUM14
CPU module
IF661
Expansion interface
IF658
Expansion interface (2 ports)
PS693
Power source module
EN651
Ethernet 100M
BU668
Expansion base
DI633
G2 I/O DI 16 points
DO633
G2 I/O DO 16 points

Remote I/O

BU643D
Basic base
PUM14
CPU module
IF661
Expansion interface
PS693
Power source module
EN651
Ethernet 100M
BU668
Expansion base
GA922
G2 I/O adapter
DI633
G2 I/O DI 16 points
BU901
TC-net™ I/O adapter base
DO633
G2 I/O DO 16 points
SA912
TC-net™ I/O adapter
BU905
TC-net™ I/O base
DI934
TC-net™ I/O DI 32 points
DO934
TC-net™ I/O DO 32 points

To Top

Environmental specifications

Item Specifications
Operating ambient temperature 0 - 55℃ (24-hour average temperature 40℃ or less)
Storage temperature -40~70℃*1
Relative humidity 5-95% RH (with no condensation)
Dust 0.3mg/m³ (no conductive dust)
Pollution degree 2 or less IEC 61131-2/JIS B 3502
Corrosive gas No corrosive gas shall be present*2
Vibration resistance 5<=f<8.4Hz: 3.5mm, 8.4<=f<150Hz: 9.8m/s2
(Compliant with IEC 60068-2-6 / JIS C 60068-2-6, test Fc)
Impact resistance 147m/s2 (Compliant with IEC 60068-2-27 /JIS C 60068-2-27, test Ea)
Noise resistance Impulse noise (power line) : 1500Vp-p, pulse width: 1μs, static electricity: 4KV, radiation field: 10V/m
Insulation resistance DC500V mega 10MΩ or more*3
Withstand voltage AC2000V per minute*3
Grounding 100Ω or less (type D grounding)
Cooling system Natural cooling
*1
For long-term storage, spare parts should be kept in a dark place away from high temperature and humidity. The temperature and humidity for storing products for long periods should be 0-40℃ and 20-80% RH (with no condensation) and the rate of temperature change should be no higher than 10℃/h.
The service life of batteries and power sources, in particular, may be affected by high ambient temperature. Store at room temperature (25℃) or below.
*2
No materials containing silicon; hydrogen sulfide, sulfurous acid gas, chlorine gas, nitrogen oxide (Nox), sulfur oxide (Sox), ammonia, silicon gas, etc.
*3
Power terminal - ground terminal

To Top

Function specifications

Item Specifications
type1 light S type1 light H type1 light D
Control system Stored program cyclic scan system
Processor Control processor 32 bit general purpose processor
Language processor Exclusive language processor (LP)
Execution method Scan method Ultrafast scan 1 - 500ms (1ms unit)
High-speed scan 1 - 500ms (1ms unit)
Main scan Floating scan Selectable
Scheduled scan 1 - 1000ms (1ms unit)
Input/output system Batch input/output: Yes (only MS task synchronized), direct input/output: Yes
Interruption I/O Number 8
Multiple interrupt function I/O multiple interrupt Not possible
Interrupt response 1ms or less
Program type EV/SS/IP/HS/MS
Program capacity 32K steps 64K steps 128K steps
Number of tasks/programs EV 8 tasks, 1 program/task
SS 1 task, 1 program/task
IP 8 tasks, 1 program/task
HS 1 task, 128 programs/tasks
MS 1 task, 256 programs/tasks
Data volume Local/global variables 64KW 96KW 128KW
Special register (S) 1KW
Data register (D) 8KW
Station global variables
I/O variables (IQ) 3KW 3KW 8KW
Index register 8 types
Number of timers Arbitrary size setting function for user data domain
I/O [G2 I/O] Number of connections System 1 system
Maximum number of units 4 units (1 basic + 3 expansion)
Maximum number of slots 32 slots 32 slots 31 slots (single) / 24 slots (dual)
Batch input/output I/O update time 22μs/W or less (at 64-point I/O, 4 consecutive accesses)
Transmission update time 22μs/W or less (at 64W consecutive accesses)
Direct input/output Instruction time 10μs/W or less
Transmission update time 15μs/W or less
TC-net I/O Loop 1 loop (up to 12 nodes) 1 loop (up to 12 nodes)
I/O [via TC-net I/O Loop] Maximum number of G2 I/O points 12 nodes, 64 slots 12 nodes, 192 slots
Maximum number of G3 I/O points 1 node, 77 slots 1 node, 77 slots
Maximum number of TC-net I/O points 12 nodes, 64 slots 12 nodes, 192 slots
Program languages LD (ladder diagram), FBD (function block diagram), SFC (sequential function chart), ST (structured text)
Execution speed Bit Contact 0.08μs 0.04μs 0.04μs
Coil 0.16μs 0.08μs 0.08μs
Integer Transmission 0.08μs 0.04μs 0.04μs
Calculation 0.08μs 0.04μs 0.04μs
Multiplication 0.24μs 0.12μs 0.12μs
Floating Calculation 0.4μs 0.2μs 0.2μs
Multiplication 0.4μs 0.2μs 0.2μs
System configuration Single Single Single/dual
Ethernet Channel 1ch built-in (100Mbps) 1ch built-in, via external EN module (100Mbps)
Tool connection Possible (built-in) Possible (built-in/EN651A)
Computer link Possible (built-in) Possible (built-in/EN651A)
Socket communication Possible (built-in) Possible (built-in/EN651A, EN911)
PC link Possible (built-in) Possible (built-in/EN651A)
RS485 Channel 1ch built-in (300bps - 38.4Kbps)
Tool connection Impossible
Computer link Possible
Free port Impossible
USB Channel 1ch built-in
Tool connection Possible
Computer link Impossible
Free port Impossible
Support network Station bus Ethernet, TOSLINE-S20, TOSLINE-S20LP
G2 I/O bus TOSLINE-S20, TOSLINE-F10, TC-net 100LP, FL-net, Profibus, DeviceNet
TC-net I/O TC-net 100LP, FL-net, Profibus, MODBUS RTU, Ethernet
RAS function Diagnosis Battery check, I/O non-sync, I/O parity check, I/O package check, language processor function check, unauthorized order detection, WDT, peripheral LSI check, etc.
Surveillance Logs (error log, event log, transmission event log), program execution time measurement, program congestion detection
Debugging & maintenance Program monitor, data tracing, input/output force

To Top

(Caution)

  • Unified Controller nv series is a registered trademark of Toshiba Corporation.
  • Other company names and product names herein are trademarks or registered trademarks of the companies concerned.
  • The information contained herein is as of June, 2014.
  • The information contained herein is subject to change without notice.
  • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of TOSHIBA or others.
  • TOSHIBA products should not be embedded to the downstream products which are prohibited to be produced and sold, under any law, and regulations.
  • TOSHIBA does not take any responsibility for incidental damage (including loss of business profit, business interruption, loss of business information, and other pecuniary damage) arising out of the use or disability to use TOSHIBA products.
  • Please use the product properly after thoroughly reading and understanding the instruction manual.
  • Export or provision to overseas of this product is restricted by foreign exchange law and foreign trade law.
  • This product is under restriction of US Export Administration Act, and permission from US government is necessary for export depending on the exporting destination.
  • This product is not manufactured for systems that is directly related to human lives such as described below. If you need to use this product for such purpose, please contact our sales representative.
    [Example]
    • The propulsion machinery control system of a nuclear power plant, safety protection system of a nuclear facility, and any other systems important to safety
    • Control system of collective transport system operation and air traffic control system
    • Medical control system that is related to human lives