The letters originate from the words "navigate / navigation" "The nv controller provides navigation to the future for control systems".
With a high-speed serial line, it is the system which connects I/O modules to controllers.
Technology of TC-net 100 is used for the transmission system and can build a reliable high speed system.
The Unified Controller combines "online maintenance of instrumentation (hot swap)" and "rapidity of electric control" together and has high reliability.
You can make it constitution of the dualization more.
Even if the transmission system is broken in three places, the system can continue to communicate.
In addition, it can be applied to monitoring and control of the high speed electrical systems such as conveying, manufacturing and electricity sub-systems.
The V series Integrated Controller.
Unified Controller nv series -type1- superseeds the S3 module of Integrated Controller V series model3000.
Equally, type2 is superseeds the L3 module.
In addition, for type2, monitoring is possible in the TOSHIBA operator station OIS-DS.
The single greatest advantage of the Unified Controller is the "TC-net I/O" communication system with loop dualization, transmission at 100Mbps within a field network connecting each input/output unit. In addition, the operational performance of the controller improves to about 2 times, in comparison with the conventional model.
The engineering tool is the same.
Therefore, they are compatible at the level of application programs.
In addition, the Unified Controller is accessible to a conventional controller by Ethernet.
Therefore, you can build a system where old and new controllers coexiste.
The control system architecture is not changed from the Integrated Controller V series or TOSDIC CIE-DS.
The existing TOSHIBA control system products are going to be replaced by the new products over time.
If we plan to terminate the existing product, we show information at any time in website or technical letters.
It will be sold overseas via a local corporation or a agency which has concluded a technical cooperation contract.
LD (Ladder Diagram), FBD (Function Block Diagram), SFC (Sequential Flow Chart), IL (Instruction List), and ST (Structured Text).
The IEC languages are widely used in the PLC industry as an international standard language, and to be a global product of the future it is a required language.
Function modules (which define complex functions) as used in instrumentation control are realized in FBD.
With a common language, that does not depend on hardware, the reuse of application programming becomes simple.
- 1. High productivity through the implementation of object oriented programming and a programming environment of high quality. (Local/Grobal variables, Encapsulation, Parts of function, User definition function blocks.
- 2. Concurrent engineering environment by multiple workers.
- 3. Remote engineering environment for off-site maintenance abd application development.
- 4. High level of debugging maintenance functions.
(Cross-reference function, Online change function, Change influence indication, Program display with the monitor screen)
TC-net 100 has a scan transmission function and can transfer station data across the network fast.
The data communications period can be set by 0.1ms unit from 1ms.
TC-net 100 is used for high-speed transmission between the controllers.
- TC-net is a registered trademark of Toshiba Corporation.
- Other company names and product names herein are trademarks or registered trademarks of the companies concerned.
- The contents are subject to change without notice for design changes or other reasons.