Micro-size series [model 1000]
This series is suited to micro-size systems for general industrial uses and plant control.
It is useful for not only loop control but also sequence control; integrates FA/PA control platforms, and offers a variety of functions.
Loop Control Module (L1)
This module has loop control functions.
Up to 8 loops can be controlled.
Capable of controlling up to 8 loops with a program capacity of 6k steps on the shortest loop cycle of 50 ms.
Hyper PID installed
Toshiba's exclusive 2-degree-of-freedom hyper PID is installed for high-precision loop control in a broad range of applications, including boiler control and combustion control.
Sequence control also available
The international standard IEC61131-3 is employed as programming language so that the L1 module may be used for not only loop control but also sequence control and batch control.
Functions as a one-loop controller
The series supports I/O modules (LP01/LP02) equipped with I/O points corresponding to TOSDIC-215D to permit use as a one-loop controller.
Connectable to TOSDIC-CIE series
Tag meter variables used in the Integrated Controller system TOSDIC-CIE are available. Connection to OIS-DS SMART serving as HMI through an Ethernet permits OIS display and setting.
Computer link port provided
An RS-485 port is provided for communication with a graphic panel or higher-level computer through a computer link.
Function Specifications List
|Maximum No. of programs||64|
|No. of loops/program capacity||8/6k steps|
|Program processing speed||1 loop/100 ms
8 loops/500 ms
|Scan cycle (main)||50 to 5000 ms|
|Higher-level network support||Ethernet||TOSLINE™-S20LP
(Module built in)
|Support HMI||OIS-DS SMART||-|
15 kinds of I/O - loop, analog, digital, pulse, etc. - are available. I/O modules can be connected to the terminal unit and DIN rails so that there is no need for useless spaces. (16 modules maximum) I/O modules may be placed as desired within a range of 1 km, and be expanded to flexibly meet your needs.
I/O modules different in IO bus rate cannot be mixedly used.I/O Module Specifications
Loop Display Unit
A loop display unit which displays information (on PV, SV, MV) for one loop and is used for manual operation is available. It can monitor up to 8 loops by means of a loop switching function.Basic Configuration
Ethernet is a surveillance control LAN used for connecting V-series controller units or a high-level HMI system. Ethernet modules of 10 Mbps are available.
|Maximum cable length||185m||100 m (between node and hub)|
|Protocol||TCP/IP UDP/IP PCMP|
|Types of transmission system||Point-to-point transmission
The TOSLINE™-S20LP is a control LAN/field network/device network used for transmission from one V-series controller unit to another, or with PLC, drive units, and various types of meters. Apart from message transmission, it is also used for scan transmission for periodic data exchange.
|Model||L1PU12H (Module built in)|
|Transmission topology||Optical duplex loop|
|Transmission rate||2 Mbps|
|Transmission distance||Station-to-station: 1 km maximum
Overall loop length: 30 km maximum
|Transmission sequence||Scan transmission, message transmission|
|Scan transmission capacity||4096 words|
- TOSDIC-CIE and TOSLINE are registered trademarks of Toshiba Corporation.
- Other company names and product names printed in the manual are trademarks or registered trademarks of the companies concerned.
* The information given herein is subject to change without notice for design change or other reasons.