X-ray Thickness Gauge
Multi channel profile meter built by learning-edge technology.
Provide high resolution measured data, enable to high quality control.
- 1. Provide high resolution profile data for quality control of coil.
- 2. It is possible adopt profile shape control.
- 3. Provide stable operations with high reliability and easy maintenance.
The ionization chamber used as multi channel type detector can be repaired without special alignment.
- 4. It is possible to add flatness measurement and temperature profile measurement function.
- 5. It is possible to support various interface (Ethernet, Profibus, FL-net, etc.).
|Measuring range||(Cold)||0.1 ～ 8.0mm|
|(Hot)||1.0 ～ 15.99mm|
|< Measurement at 2mm >|
|Reproducibility||0.1% of set thickness (2σ)|
|Noise||0.1% of measured thickness (2σ)|
|Drift||0.1% of measured thickness/10h (Based on IEC61336)|
|Center time constant||(Cold)||10ms|
|Profile integration time||2s|
- * The specification shown above is an example. Actual specifications can be adjusted and may vary depending on installation conditions.